Why we choose eddy fan?

Eddy fan

                                                              3.jpg

Eddy fan equipment is a new type of gas source, choose high strength, fatigue resistance, high quality aluminum alloy material as the main material, it has compact structure, small volume light weight characteristics of the vortex pump adopts special-purpose motor straight association-like, don't need any variable speed institutions, due to its simple structure, direct drive form, so also has low noise, energy consumption province, stable performance, convenient maintenance, and send the air no water, no oil, low temperature, this is can't compare with other air supply equipment.

The working principle of eddy blower

The eddy blower is also called high pressure fan and high pressure blower

Working principle of the eddy current fan: on the impeller of dozens of leaves, it was similar to the large steam turbine impeller, when eddy fan impeller rotating impeller blade in the middle of the air by the effect of centrifugal force, toward the edge of the impeller motion, where the air into the pump body of ring cavity, and then return to the impeller, from the starting point of blade in the same way again and circular motion, because the air is uniform acceleration, the impeller rotates the circulation flow made by air in the form of a helix appear, so the air to leave the pump body, high energy for use.(it generates 12 to 17 times the pressure of a centrifugal fan of the diameter of a rotating speed.)

Structural characteristics of Eddy fan

Eddy fan equipment is a new type of gas source, choose high strength, fatigue resistance, high quality aluminum alloy material as the main material, it has compact structure, small volume light weight characteristics of the vortex pump adopts special-purpose motor straight association-like, don't need any variable speed institutions, due to its simple structure, direct drive form, so also has low noise, energy consumption province, stable performance, convenient maintenance, and send the air no water, no oil, low temperature, this is why other air supply equipment can't compare with it.

The maximum pressure and maximum flow of eddy current fan

The pressure and flow are the basic parameters of the eddy current fan. In this respect, when the fan outlet and the inlet are fully opened, the maximum air volume of the fan can be obtained.When the fan inlet or outlet is completely closed, the maximum negative pressure or maximum positive pressure of the eddy fan can be obtained.In general, when using the maximum positive pressure and negative pressure of the fan, the release pressure valve should be equipped to protect the safety of the eddy fan.At present, the maximum pressure of eddy current fan in domestic market is 46kpa, and there is a yuxin eddy current fan which can reach 104kpa.The maximum amount can be reached 2400m3/h.